All Categories > Pole Bands  
 

Pole Bands


Click on a Product to view details.

Pole Attachments - Beam Style with Hinge

Pole Attachments - Beam Style with Hinge

(13)
IMPulse Beam Style with Hinge

Beam Style clamp assemblies are attachments which include a swivel clevis for use in cantilever assemblies. Beam Style clamps are manufactured utilizing hot-dipped galvanized ductile iron castings. IMPulse manufactures Beam Style clamps for various beam types and sizes. To determine the Beam Style clamp required see the selection chart. IMPulse will supply the fittings necessary for your application.
Pole Attachments - Beam Style with Bent Rod

Pole Attachments - Beam Style with Bent Rod

(27)
IMPulse Beam Style with Bent Rod

Beam Style with Bent Rod assemblies are attachments which include a high strength bent rod for their use in various assemblies including SWFT and SCAT pull-offs, headspans, cross spans, etc. Beam Style clamps are manufactured utilizing hot-dipped galvanized ductile iron castings. IMPulse manufactures Beam Style clamps for various beam types and sizes and are rated at 10,000 lb. minimum ultimate strength. To determine the Beam Style clamp required see the selection chart. IMPulse will supply the fittings necessary for your application.
Angle Beam Clamps (Single Bracket)

Angle Beam Clamps

(10)
IMPulse Angle Beam Clamps

Angle Beam Clamp assemblies are used in various assemblies where high strength is necessary. The single version of the Angle Beam Clamp has an ultimate tensile strength of 12,000 lbs. (F). This allows for its use in arrangements such as the Bridle Span which provides intermediate pull-off points between the support poles for single wire or simple catenary systems on tight radius curves. The double version of the Angle Beam Clamps have an ultimate tensile strength of 23,000 lbs. (F). This allows for its use in arrangements such as counterweights and high strength terminations on beam structures. The Angle Beam Clamp is manufactured of hot-dipped galvanized steel angle, pre-drilled ...
Double Hinge Pole Band

Stainless Steel Pole Bands

(5)
4-Piece Pole Band (Light)

4-Piece Pole Bands

(7)
Bracket Style Pole Bands (059326-3002)

Bracket Style Pole Bands

(2)
IMPulse Bracket Style Pole Bands

Bracket Style Pole Bands are available to provide many cantilever mounting methods. Mounting methods include two, three and four cantilevers on one pole. Multiple cantilever mounting brackets are typically used at overlaps, crossovers and turnouts. Bracket Style Pole Bands are manufactured of hot-dipped galvanized steel channel with galvanized hardware. Bracket Style Pole Bands are best utilized when forces do not exceed 6,000 lbs. (F) per side. The long side of the Bracket Style Pole Band may share the 6,000 lbs. (1/2 F) load by supplying 3,000 lbs to each mounting location. IMPulse Bracket Style Pole Bands are furnished with pre-drilled holes which allow for back ...
Wrap Pole Bands

Wrap Pole Bands

(8)
IMPulse Wrap Style Pole Bands

The Wrap Style Pole Band is an adjustable wrap which allows its use in many high strength applications. This style of pole band is used on cross spans, headspans, spring tensioners, backbones and pull-offs. There are two (2) types of Wrap Style Pole Bands provided by IMPulse. The 0.38 [9.65 mm] version which has a strength rated at 18,000 lbs., and the 0.50 [12.70 mm] version which is rated at 30,000 lbs. These Wrap Style Pole Bands are manufactured of stainless steel wire rope, copper compression sleeves, and hot-dipped galvanized steel yoke plates and hardware.