All Categories > Insulators > Loop Insulators > Item # 0694003-3002  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # 0694003-3002, Loop Insulator with (1) Thimble

Loop Insulators have multiple applications. The Loop Insulator can be used in cantilever assemblies, crossovers, section insulator suspension assemblies, hangers, headspans, cross-spans, pull-offs, terminations and many other applications where high strength and minimum clearance requirements are necessary.

The Loop Insulators are manufactured using fiberglass strands encapsulated in epoxy with a green polymide sheath for durability and weather resistance. Polymide thimbles, fitting wire ranges up to 3/8" [9.53 mm], are manufactured within the design of the Loop Insulator to allow for versatile application with minimal wear to the main insulator. Loop Insulators are rated at an ultimate tensile strength of 5,000 lbs. with service voltage ratings at 1,500 VDC and up to 1,000 VAC. The minimum voltage leakage distance is 4.12 inches.

Specifications  · Ratings



A - Insulator (Fiberglass Encapsulated in Epoxy with Polymide Sheath (Color: Olive Green)
B - Thimble (Polymide)

Ultimate Tensile Strength

5000 lbs.


0.47 lbs.


Ultimate Load (F)1

5000 lbs. (with Thimble)


Fits up to 0.38" Wire Rope

Leakage Distance

4.12 in

AC Dry for 1 Minute Flashover

56.6 kV

AC Wet for 1 Minute Flashover

10 kV @ 15 Seconds
20 kV after 5 Seconds

Service Voltage

Up to 1500 VDC
Up to 1000

Positive Impulse

42 kV
1 Based on a 2 times safety factor.


·  Materials (0694003-3002)