All Categories > Insulators > Loop Insulators > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Loop Insulators

Check up to five results to perform an action.

Loop Insulators have multiple applications. The Loop Insulator can be used in cantilever assemblies, crossovers, section insulator suspension assemblies, hangers, headspans, cross-spans, pull-offs, terminations and many other applications where high strength and minimum clearance requirements are necessary.

The Loop Insulators are manufactured using fiberglass strands encapsulated in epoxy with a green polymide sheath for durability and weather resistance. Polymide thimbles, fitting wire ranges up to 3/8" [9.53 mm], are manufactured within the design of the Loop Insulator to allow for versatile application with minimal wear to the main insulator. Loop Insulators are rated at an ultimate tensile strength of 5,000 lbs. with service voltage ratings at 1,500 VDC and up to 1,000 VAC. The minimum voltage leakage distance is 4.12 inches.




   
  Results 1 - 3 of 3 1 

Item #

Item Name

Ultimate Tensile Strength

Ultimate Load (F)

Service Voltage

Weight

0694003-3001 Standard Loop Insulator 5000 lbs. 12000 lbs. Up to 1500 VDC
Up to 1000
VAC
0.45 lbs.
0694003-3002 Loop Insulator with (1) Thimble 5000 lbs. 5000 lbs. (with Thimble) Up to 1500 VDC
Up to 1000
VAC
0.47 lbs.
0694003-3003 Loop Insulator with (2) Thimbles 5000 lbs. 5000 lbs. (with Thimble) Up to 1500 VDC
Up to 1000
VAC
0.47 lbs.
  Results 1 - 3 of 3 1